4.2 Flea Application Rate

For flea control‚ mix Bifen I/T at 1 oz per 24 gallons of water. This solution should be applied to 1‚000 square feet. Treat areas where fleas are present‚ such as pet areas‚ carpets‚ and outdoor spaces. Ensure thorough coverage for optimal effectiveness. Repeat as needed based on flea activity and resistance. Always adhere to the product label and safety guidelines for best results.

4.3 Termite Application Rate

For subterranean termites‚ Bifen I/T is mixed at a 0.06% emulsion rate. To prepare‚ mix 1 oz of Bifen I/T with 127 oz of water to make 1 gallon of solution. Apply 4 gallons of this mixture per 10 square feet for trench treatments around the home perimeter. This ensures effective barrier creation against termite infestations. Follow label instructions for precise application rates and methods to achieve optimal results.

4.4 General Pest Control Application Rate

For general pest control‚ Bifen I/T is typically mixed at a rate of 0.5 to 1 oz per gallon of water. This solution is applied at 1 gallon per 1‚000 square feet. Adjust the concentration based on pest severity and type. For crawling insects‚ apply the mixture to the foundation‚ 3 feet up and 1 foot out. Higher volumes may be needed for dense vegetation. Always follow label instructions for specific pest applications and ensure proper coverage for effective results.

Application Methods

Bifen I/T can be applied via spray‚ trench treatment‚ or crack and crevice methods. Spray applications cover large areas‚ while trench treatments target subterranean pests. Crack and crevice treatments ensure penetration into hidden pest habitats‚ providing effective control for various pest types.

5.1 Spray Application

Bifen I/T spray application is effective for controlling mosquitoes‚ ticks‚ and fleas. Mix 0.5 to 1 oz per gallon of water‚ depending on pest severity. Apply 13 gallons per 1‚000 sq ft monthly for mosquitoes and ticks. For general pest control‚ adjust rates as needed. Use low-volume equipment for efficient coverage. Ensure thorough application to target areas‚ including vegetation and surfaces where pests are active. Follow safety guidelines and product label instructions for optimal results and to minimize environmental impact.

5.2 Trench Treatment

For trench treatment‚ mix 1 oz of Bifen I/T with 1 gallon of water. Apply along the foundation perimeter‚ ensuring coverage of the soil and foundation wall. Trenches should be 6-12 inches deep and 12 inches wide. Apply 4 gallons of solution per 10 linear feet. Fill the trench and water lightly to ensure penetration. This method is effective for subterranean termites and other soil-dwelling pests. Always follow safety precautions and product label guidelines for optimal results and environmental safety.

5.3 Crack and Crevice Treatment

For crack and crevice treatment‚ mix 0.5 to 1 oz of Bifen I/T per gallon of water. Use low-volume application equipment to target cracks‚ crevices‚ and small voids. Apply directly to areas where pests are harboring or entering. Avoid over-application to prevent runoff. This method is ideal for controlling crawling pests like ants and spiders. Ensure all cracks and crevices are sealed after treatment to prevent re-infestation. Always follow label instructions and safety guidelines for effective pest control and environmental protection.

5.4 Foam Application

Foam application is effective for targeting deep voids and wall cavities. Mix 0.5 to 1 oz of Bifen I/T per gallon of water to create a foam solution. Apply using foam generation equipment to ensure deep penetration into wall voids‚ termite galleries‚ and other hidden areas. Foam dries quickly‚ leaving a residual barrier. Avoid oversaturation to prevent runoff. This method is ideal for localized infestations and hard-to-reach areas. Always follow the product label for specific foam application rates and safety guidelines to ensure effective pest control and environmental safety.

Mixing for Specific Pests

Mixing rates vary by pest type‚ with 0.5–1 oz per gallon for crawling insects‚ 0.331 oz for mosquitoes‚ and 1 oz for fleas‚ ensuring targeted control.

6.1 Mixing for Subterranean Termites

For subterranean termites‚ mix Bifen I/T at a rate of 0.06% emulsion by combining 1 oz of Bifen I/T with 127 oz of water. This solution is typically used for trench treatments around the perimeter of the home. Apply 4 gallons of the mixed solution per 10 linear feet of trench to ensure effective barrier creation. Always follow the product label for precise dilution rates and application methods to achieve optimal results against termites.

6.2 Mixing for Crawling Pests

For crawling pests‚ mix 0.5 to 1 oz of Bifen I/T per gallon of water. Apply the solution to the outside foundation of the home‚ approximately 3 feet up the exterior walls. Treat entry points‚ cracks‚ and crevices where pests may enter. This concentration effectively targets ants‚ spiders‚ and other crawling insects. Ensure thorough coverage for optimal results. Always refer to the product label for specific pest-related instructions and adjustments based on infestation severity.

6.3 Mixing for Flying Insects

For flying insects‚ mix 1 oz of Bifen I/T per gallon of water. This solution is effective for mosquitoes and flies. Apply using a spray tank or fogging equipment‚ targeting areas where insects are most active. Treat outdoor spaces‚ such as yards and patios‚ at a rate of 1 gallon per 1‚000 square feet. Repeat every 21-30 days as needed. Adjust concentrations based on pest severity and follow label instructions for optimal control. Ensure proper safety measures‚ including PPE‚ during application.

Equipment and Tools

Use a spray tank‚ measuring cup‚ and protective gear. Low-volume foggers or backpack sprayers are ideal for precise application. Ensure equipment is clean and calibrated properly for accurate mixing and application.

7.1 Recommended Spray Equipment

For effective application of Bifen I/T‚ use a backpack sprayer or low-volume fogger. These tools ensure precise delivery and even coverage. A spray tank with a capacity of 1-5 gallons is ideal for most residential treatments. Use a high-quality hose and spray nozzle to maintain consistent pressure. For larger areas‚ consider a powered sprayer or fogging unit. Always ensure equipment is clean and well-maintained to prevent clogging and ensure accurate application rates. Properly calibrated equipment is essential for achieving desired pest control results.

7.2 Mixing Containers and Accessories

Use clean‚ food-grade plastic containers for mixing Bifen I/T to prevent contamination. Stainless steel or glass containers are also suitable. Avoid using aluminum or iron equipment‚ as they may react with the product. A sturdy measuring cup and stir stick are essential for accurate dilution. A funnel can help prevent spills when transferring the mixture to spray equipment. Always rinse containers thoroughly after use to ensure no residue remains. Properly store accessories to maintain their condition and functionality for future applications. Safety and cleanliness are critical when handling pesticides.

7.3 Calibration of Equipment

Calibrating spray equipment ensures accurate application rates of Bifen I/T. Start by measuring the output of your sprayer in gallons per minute (GPM) under normal operating pressure. Calculate the desired flow rate based on the treatment area and label recommendations. Adjust nozzles or pressure settings to achieve the correct GPM. Regular calibration prevents over-application or under-application‚ ensuring effective pest control and compliance with safety guidelines. Always refer to the equipment manufacturer’s instructions for specific calibration procedures. Proper calibration is essential for achieving desired results and minimizing environmental impact.

Environmental Considerations

Avoid runoff and drift to protect water sources. Apply Bifen I/T during low-wind conditions and avoid spraying before heavy rain to minimize environmental contamination and ensure efficacy.

8.1 Avoiding Runoff and Drift

To minimize environmental impact‚ apply Bifen I/T during low-wind conditions (below 10 mph) to prevent drift. Avoid spraying when rain is expected within 24 hours to reduce runoff. Use coarse spray nozzles and keep the spray volume low to ensure droplets land on the target area. Avoiding runoff and drift helps protect water sources and ensures the product stays effective on the intended surface. Proper application timing and techniques are crucial for environmental safety and pest control efficacy.

8.2 Protecting Water Sources

To protect water sources‚ avoid applying Bifen I/T near ponds‚ lakes‚ or rivers. Keep the product away from drains and gutters to prevent contamination. Use containment measures to catch any accidental spills. Avoid spraying when water is present on surfaces‚ as this can lead to runoff. Always follow label instructions to ensure safe application distances from water bodies. Consulting the Safety Data Sheet (SDS) for additional guidelines on environmental protection is recommended to maintain water quality and safety.

8.3 Application Timing

Apply Bifen I/T during calm weather to prevent drift and ensure accurate coverage. Avoid spraying when rain is expected within 24 hours to maintain effectiveness. For best results‚ treat areas in the early morning or late evening to minimize exposure to beneficial insects. Allow the product to dry completely before irrigation or rainfall. Follow label instructions for specific timing recommendations based on pest type and environmental conditions to ensure optimal performance and minimize environmental impact.

Troubleshooting Common Mistakes

Common errors include overmixing‚ undermixing‚ or applying unevenly. Always follow label guidelines for precise measurements and application rates to ensure effective pest control and safety.

9.1 Overmixing or Undermixing

Overmixing or undermixing Bifen I/T can lead to reduced effectiveness or environmental risks. Overmixing may result in excessive chemical concentration‚ potentially harming plants or wildlife. Undermixing can fail to control pests adequately. Always follow the recommended mix rates‚ such as 0.331 oz per gallon for mosquitoes and ticks or 1 oz per gallon for general pest control. Double-check measurements and use calibrated equipment to ensure accuracy. Proper mixing ensures optimal pest control while minimizing environmental impact. Avoid deviations from the label instructions to maintain safety and efficacy.

9.2 Insufficient Coverage

Insufficient coverage can reduce the effectiveness of Bifen I/T treatments. Common causes include inadequate spray volume‚ incorrect dilution rates‚ or improper equipment calibration. For example‚ applying less than the recommended 13 gallons per 1‚000 sq ft for mosquitoes and ticks may leave areas unprotected. To avoid this‚ ensure proper calibration of spray equipment and follow label instructions for dilution rates‚ such as 0.331 oz per gallon for mosquito control. Higher volumes may be needed for dense vegetation to achieve thorough coverage and optimal pest control outcomes.

9.3 Uneven Application

Uneven application can lead to inconsistent pest control results. Common issues include improper mixing‚ clogged spray nozzles‚ or irregular walking speeds during treatment. To ensure even coverage‚ always maintain the recommended dilution rates‚ such as 0.331 oz per gallon for mosquito control or 1 oz per gallon for general pests. Regularly inspect and clean equipment to prevent clogs‚ and train applicators to move at steady‚ uniform paces. This helps achieve consistent pesticide distribution and maximizes the effectiveness of Bifen I/T treatments across the target area.

Storage and Disposal

Store Bifen I/T in a cool‚ dry place away from heat sources and open flames. Dispose of unused product according to local regulations to prevent environmental contamination. Always clean equipment thoroughly after use to ensure safety and prevent residue buildup.

10.1 Proper Storage Conditions

Store Bifen I/T in a cool‚ dry‚ well-ventilated area away from direct sunlight‚ heat sources‚ and open flames. Keep the product in its original container with the label intact. Ensure the container is tightly sealed to prevent contamination. Protect from moisture and freezing temperatures to maintain product stability. Store out of reach of children‚ pets‚ and unauthorized personnel. Avoid storing near food‚ water sources‚ or flammable materials. Always follow the product label instructions for specific storage recommendations to ensure safety and efficacy.